Concrete Calculator

Estimate the concrete volume for a slab, footing or round column with this concrete calculator, including extra for waste.

Your inputs

Calculated on your device. Your inputs stay with you.

A LITTLE MORE CLARITY

Concrete including waste

2.2m³
Net volume (m³)
2
Cubic yards including waste
2.877491

Geometric volume estimate only. Verify structural design, site dimensions and supplier requirements.

Results may include sensitive inputs. Review before copying or sharing.

How it works

For slabs and rectangular footings, volume = length × width × depth. For round columns, volume = π × (diameter / 2)² × height. Multiply by count and (1 + waste / 100). Feet convert to meters before computing cubic meters; 1 cubic yard = 0.764554857984 m³.

How to use the concrete calculator

Choose slab, footing or round column. Enter dimensions in one unit, count and waste allowance.

Concrete Calculator formula

  1. Slab/footing volume = L × W × depth. Column volume = π(diameter/2)² × height. Total = volume × count × (1 + waste/100).

Worked example

A 5 m × 4 m slab at 0.1 m depth needs 2 m³ net, or 2.2 m³ with 10% waste.

Understanding your result

The result is the geometric volume in cubic meters plus your waste allowance. Order slightly more than the net volume to cover uneven ground, spillage and formwork. Mix design, reinforcement and strength need professional advice.

Frequently asked questions

Does this specify structural concrete requirements?

No. It estimates geometric volume only. Structural design, reinforcement, strength and site requirements need appropriate professional assessment.

How is waste applied to multiple columns?

The net column volume is multiplied by the count, then by one plus the waste percentage. Enter the full diameter, not the radius.

How do I calculate concrete for a slab?

Multiply length × width × depth in the same unit. A 5 m × 4 m slab 0.1 m deep needs 2 m³ before waste.

How much extra concrete should I order?

Many builders add 5% to 10% for waste and uneven subgrade. Enter your allowance in the waste field.

Can I enter dimensions in feet?

Yes. Choose feet as the dimension unit. The calculator converts to cubic meters for the result.

Last updated: · Reviewed by the Orizonsol team · How we build and check our calculators